Hi, I am facing this strange problem on HP-DL380 G7 server with fresh installed 6.7 U1. I have 6 SAS and 2 SSD drives connected via a LSI 9211-8i controller flashed IT mode. I am not sure why but ESXi (even the installer) only shows 1 SSD. I think the reason is because both SSDs are showing same naa that's why ESXi takes only the first one in the list. I found this in the logs
Which makes me think that there are two devices being presented by the RAID controller, sas_addr(0x4433221103000000), phy(3) and sas_addr(0x4433221102000000), phy(2) but device_name seems to be the same for both. Not to mention that this works fine with CentOS or any other Linux distro if I boot that server.
Here is the some output from dmesg showing all 8 devices from the SAS controller. The one *bold* below has the issue.
[root@localhost:~] dmesg | grep "Fusion MPT SAS Host"
2019-01-02T05:49:51.055Z cpu11:2097918)<6>Fusion MPT SAS Host:3:0:0:0 :: SATA: handle(0x000a), sas_addr(0x4433221103000000), phy(3), device_name(0x5002538043584d30)
2019-01-02T05:49:51.055Z cpu11:2097918)<6>Fusion MPT SAS Host:3:0:0:0 :: SATA: enclosure_logical_id(0x5000000080000000), slot(0)
2019-01-02T05:49:51.055Z cpu11:2097918)<6>Fusion MPT SAS Host:3:0:0:0 :: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
2019-01-02T05:49:51.055Z cpu11:2097918)<6>Fusion MPT SAS Host:3:0:0:0 :: serial_number(S0Z4NEAC887894 )
2019-01-02T05:49:51.055Z cpu11:2097918)<6>Fusion MPT SAS Host:3:0:0:0 :: qdepth(32), tagged(1), simple(1), ordered(0), scsi_level(7), cmd_que(1)
2019-01-02T05:49:51.056Z cpu11:2097918)<6>Fusion MPT SAS Host:3:0:1:0 :: SSP: handle(0x0009), sas_addr(0x5000cca0252c94d9), phy(0), device_name(0x5000cca0252c94db)
2019-01-02T05:49:51.056Z cpu11:2097918)<6>Fusion MPT SAS Host:3:0:1:0 :: SSP: enclosure_logical_id(0x5000000080000000), slot(3)
2019-01-02T05:49:51.056Z cpu11:2097918)<6>Fusion MPT SAS Host:3:0:1:0 :: serial_number( PQGTJ20B)
2019-01-02T05:49:51.056Z cpu11:2097918)<6>Fusion MPT SAS Host:3:0:1:0 :: qdepth(254), tagged(1), simple(1), ordered(0), scsi_level(6), cmd_que(1)
2019-01-02T05:49:51.058Z cpu11:2097918)<6>Fusion MPT SAS Host:3:0:2:0 :: SSP: handle(0x000c), sas_addr(0x5000cca01220f341), phy(1), device_name(0x5000cca01220f343)
2019-01-02T05:49:51.058Z cpu11:2097918)<6>Fusion MPT SAS Host:3:0:2:0 :: SSP: enclosure_logical_id(0x5000000080000000), slot(2)
2019-01-02T05:49:51.058Z cpu11:2097918)<6>Fusion MPT SAS Host:3:0:2:0 :: serial_number( PMGL3SRB)
2019-01-02T05:49:51.058Z cpu11:2097918)<6>Fusion MPT SAS Host:3:0:2:0 :: qdepth(254), tagged(1), simple(1), ordered(0), scsi_level(6), cmd_que(1)
2019-01-02T05:49:51.060Z cpu11:2097918)<6>Fusion MPT SAS Host:3:0:3:0 :: SATA: handle(0x000b), sas_addr(0x4433221102000000), phy(2), device_name(0x5002538043584d30)
2019-01-02T05:49:51.060Z cpu11:2097918)<6>Fusion MPT SAS Host:3:0:3:0 :: SATA: enclosure_logical_id(0x5000000080000000), slot(1)
2019-01-02T05:49:51.060Z cpu11:2097918)<6>Fusion MPT SAS Host:3:0:3:0 :: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
2019-01-02T05:49:51.060Z cpu11:2097918)<6>Fusion MPT SAS Host:3:0:3:0 :: serial_number(S0Z4NEAC871708 )
2019-01-02T05:49:51.060Z cpu11:2097918)<6>Fusion MPT SAS Host:3:0:3:0 :: qdepth(32), tagged(1), simple(1), ordered(0), scsi_level(7), cmd_que(1)
2019-01-02T05:49:51.062Z cpu11:2097918)<6>Fusion MPT SAS Host:3:0:4:0 :: SSP: handle(0x000d), sas_addr(0x5000c50033992991), phy(4), device_name(0x5000c50033992990)
2019-01-02T05:49:51.062Z cpu11:2097918)<6>Fusion MPT SAS Host:3:0:4:0 :: SSP: enclosure_logical_id(0x5000000080000000), slot(7)
2019-01-02T05:49:51.062Z cpu11:2097918)<6>Fusion MPT SAS Host:3:0:4:0 :: serial_number(6SE31T6N0000B133JVJM)
2019-01-02T05:49:51.062Z cpu11:2097918)<6>Fusion MPT SAS Host:3:0:4:0 :: qdepth(254), tagged(1), simple(1), ordered(0), scsi_level(6), cmd_que(1)
2019-01-02T05:49:51.065Z cpu11:2097918)<6>Fusion MPT SAS Host:3:0:5:0 :: SSP: handle(0x000e), sas_addr(0x5000c50033972c01), phy(5), device_name(0x5000c50033972c00)
2019-01-02T05:49:51.065Z cpu11:2097918)<6>Fusion MPT SAS Host:3:0:5:0 :: SSP: enclosure_logical_id(0x5000000080000000), slot(6)
2019-01-02T05:49:51.065Z cpu11:2097918)<6>Fusion MPT SAS Host:3:0:5:0 :: serial_number(6SE3208A0000B1331GYK)
2019-01-02T05:49:51.066Z cpu11:2097918)<6>Fusion MPT SAS Host:3:0:5:0 :: qdepth(254), tagged(1), simple(1), ordered(0), scsi_level(6), cmd_que(1)
2019-01-02T05:49:51.069Z cpu11:2097918)<6>Fusion MPT SAS Host:3:0:6:0 :: SSP: handle(0x000f), sas_addr(0x5000c5001b2028e1), phy(6), device_name(0x5000c5001b2028e0)
2019-01-02T05:49:51.069Z cpu11:2097918)<6>Fusion MPT SAS Host:3:0:6:0 :: SSP: enclosure_logical_id(0x5000000080000000), slot(5)
2019-01-02T05:49:51.069Z cpu11:2097918)<6>Fusion MPT SAS Host:3:0:6:0 :: serial_number(6SE0WFHC0000B1062CUF)
2019-01-02T05:49:51.069Z cpu11:2097918)<6>Fusion MPT SAS Host:3:0:6:0 :: qdepth(254), tagged(1), simple(1), ordered(0), scsi_level(6), cmd_que(1)
2019-01-02T05:49:51.072Z cpu11:2097918)<6>Fusion MPT SAS Host:3:0:7:0 :: SSP: handle(0x0010), sas_addr(0x5000c5003190c665), phy(7), device_name(0x5000c5003190c664)
2019-01-02T05:49:51.072Z cpu11:2097918)<6>Fusion MPT SAS Host:3:0:7:0 :: SSP: enclosure_logical_id(0x5000000080000000), slot(4)
2019-01-02T05:49:51.072Z cpu11:2097918)<6>Fusion MPT SAS Host:3:0:7:0 :: serial_number(6SE1VN6G0000B12008KB)
2019-01-02T05:49:51.072Z cpu11:2097918)<6>Fusion MPT SAS Host:3:0:7:0 :: qdepth(254), tagged(1), simple(1), ordered(0), scsi_level(6), cmd_que(1)
I can't seem to figure out what is the issue and what is the root cause. Really need some help around.
Thanks.